Control any computer (easy)

How To Setup DarkComet-RAT v4.0

Follow the instruction given bellow to setup DarkComet - RAT

Step 1: Free Download DarkComet - RAT from  http://www.darkcomet-rat.com/downloaddc.dc  to hack Computer or email account password.


Step 2: Now, go to No-ip.com and register for an account. Add a host, download No-ip client and connect to your host.

Step 3: Run DarkComet RAT on your computer to see,

Step 4: Now hit on Setting ->No-IP Updater

Now, enter your No-IP information ( Host,E-mail and password ) in the boxes and click " Update DSN " button. If you got a message saying that you succesfully updated your Host name then great, if not, make sure that No-IP is working properly and " TRY AGAIN "

It's better if you check the "Auto update your no-ip dsn when your IP change" box, when you finish close the window.

Step 5: Now hit on "Edit Server" -> Main settings to see,

Press the "Generate" button 5-9 times to create a new unique mutex for the process, after that enter an ID for the server so you can identify the slave later and finally enter your profile's name.

Step 6: Now hit on "Network Settings" to see,

Now enter your No-IP on the box called "IP/DNS" and enter the "Port" bellow that,now press on the button labelled "Add this configuration" to add your host's information. As you can see, after you add the host it will appear on the list on the left.

Now press both "Green arrow button" next to IP/DNS and above one to get your Local IP,LAN IP or your WAN IP.

After that you can Test the connection by pressing "Test Network" Button.

Step 7: Now hit on "Module Startup" and check the box on the top which is labelled "Enable module server startup", then choose an installation path and name and finally have fun with the other check boxes bellow...

Step 8: Unfer "Install Message" tap, you can enable it and enter your own error message if you need to, just the infos and choose the icon and thats it...

Step 9: Here under tha "Module Shield" tap, I strongly recommend that you check the "Totally hide stub...." and "Totally hide parent stub.." box, after that you can choose the other settings as you feel necessary...

Step 10: For the "KeyLogger" tap, I guess I don't need to tell you, just check the "Active offline keylogger" box, and if you want to get Logs via FTP activate that too and enter your FTP information.

Step 11: Now the "Choose Icon" tap, leave it on "No Icon" if you don't need it, or click on "Custom Icon" and choose an icon from list bellow, or yet add your very own by putting the path for the *.ico file in the box.

Step 12: Now under the "File Binder" tap, you can bind more than one file to your server..
Start by browsing for the files and when you choose a file click on the "Add File" button to add it to the list until you're done with the files. Also you can let the binded files run only for once with your server or you can check the "Execute binder at each server startup" to do so and finally, select what do you wanna do with the files, either "Drop and execute" or "Inject resource to explorer".

Step 13: Now go to "Build Module" tab to finally create your server. Choose the "Output Extension", then use the "Compression method" or just disable it and finally check the "save profile settings after builed".

Now, proudly press "Build Server" and choose where to save and Congratz..

After you do that, you're gonna see a lot of movement on the big box on top and you might see a black window apears for few seconds to compress the server and after some time server file will get created.

Thats it..